RFID Reader Configuration Made Easy!
Using a RAIN RFID fixed reader has never been as simple as today with the new Autonomous Mode that was recently added to CAEN RFID fixed readers: the Quattro and the Proton.
The Autonomous Mode allows users to easily configure the reader with a user-friendly web interface in order to make the reader work without any further intervention.
Here are the main features made possible by the Autonomous Mode:
- HW and SW Trigger Management
The reading operation can be started and stopped using the GPIO lines of the readers as well as via specific commands from a PLC or a controlling PC. - Flexibility on Output Data Format
An easy-to-use interface defines and format the output data, including the possibility to format JSON message-containing data from the tags. - Duty Cycle Configuration
- Antenna Selection
The user can select the antennas to be used in the inventory process. - Configurable Air Interface Parameters
Like output power, Q value, sessions - Multiple Output Interfaces
Data can be sent to the serial port, to a standard TCP/IP socket or via HTTP/HTTPS POST directly to an application server. - Tag Filtering
Users can filter tags to be read by meaning of matching data (select command) or by time (avoid reading the same tag continuously if not needed). - RSSI Filtering
Tags with low RSSI can be filtered out to simply exclude unwanted tags. - All Tag Memory Banks Content
Can be read and returned in formatted output data.
The Autonomous mode is available on both the Quattro and the Proton readers.