UHF Metal Tag Dolphin Series OPP4215 (Picture: OPP IOT)

What You Need to Know When Using RFID Tags in High Temperatures

High temperature RFID Tags OPP4215.

When one talks about high temperature RFID tags, it generally means temperatures above 150 °C to over 200 °C or higher.

There are 3 important factors that you should know when using RFID in these temperature conditions.

Carl Chen
Sales Manager
ChengXiang Putian City Fujian, China
Smile Lv
Sales Manager
ChengXiang Putian City Fujian, China

The maximum rated temperature of the RFID tag (transponder)

The bonding between the antenna coil or rod and the IC (many newer tags use a single IC which includes processor, transponder and memory) is the most vulnerable connection that can deteriorate when exposed to high heat. Depending on how the bond is created or the “solder” that connects them together, the bond will separate when exceeding the rated temperature, especially based on exposure time.

Depending on the tag type, labels for example, temperature can also cause deterioration of the inlay material the IC and antenna are mounted to. To help communicate these limits for a tag, the manufacturer will typically publish multiple tag temperature per exposure time ratings to show ranges of possible use.

The exposure time at a specific temperature

This brings us to point number two, exposure time at temperature. Very few tags can sustain exposure to elevated temperatures, generally above 150 °C for an infinite or even prolonged amount of time. The tag will typically have a rated exposure time in minutes versus temperature, at which time the tag must be allowed to cool to a rated sustained or as in many noted cases, “Storage” temperature in order to prevent damage to the IC’s memory, circuitry, or the antenna bonding.

You must be very careful to look into the details of the operation or use of a high-temp rated tag to make sure that the temperatures you will expose it to versus time do not exceed these limits or you will most likely see premature failure or deterioration in operation.

The cooling time before the tag is read or written

The final point is cooling time before operation or reading and writing. All tags will have a temperature rating for what temperature it can be read or written to safely. This is typically noted as the “Operating” temperature. It is critical not to activate the tag for reading or writing before the tag falls within this temperature range. There are several reasons for this including again, IC damage and/or antenna bond damage.

For example, if a tag is mounted to a pallet on a conveyor, the tag must be allowed to cool from the exit of an oven before it reaches the read/write head. This means the process must allow ether a dwell time or a long enough distance between the two operations so the tag can adequately cool. A recommendation here would be to try not to mount the tag directly to a metal surface or provide insulation between the metal and tag to prevent the residual heat from the metal causing secondary heating of the tag.

OPP4215 is a special rfid tag designed for high temperature environments

  • Operation Temperature: -40 °C to +150 °C (working 10hours in 180 °С)
  • Storage Temperature: -55 °C to +200 °C (280 °С for 50 minutes, 250 °С for 150 minutes)

Watch our products

OPP2626 PPS Metal UHF Tag
OPP7111 High Temperature FPC UHF Inlay
OPP130 RFID UHF Tag up to 30 Meters
High Temperature UHF Metal Tag
Cookies are necessary to provide you with our services. By continuing your visit on the website, you consent to the use of cookies.
More information Ok