Thomas Kaiser, CEO, ID4us

ID4us - no chip inside

Chipless RFID tags significantly extend the read range and the tag localization accuracy, while reducing the reader’s power consumption and the per-tag-costs down to 1 cent.

Moreover, chipless RFID tags enable full tag flatness and full printability.

However, beside such distinct advantages with breakthrough potential in various markets, Chipless Tags impose demanding challenges like maximizing the number of stored and detectable bits as a function of the available tag surface and the required reading range. Solving such challenges depends on the requirement of the specific application.

The vision of ID4us is to replace the widespread bar code with Chipless RFID tags by means of novel Digital Signal Processing, Artificial Intelligence and Technological Advances in Printable Nano Electronics.

Thomas Kaiser, CEO, ID4us

Supplier Excellence

Technologies

Application Fields

ID4us

Cheap Tag – What if the price per tag would reach 1ct?

If the price per tag would reach 1 ct then e.g. truly cheap products could be under economic aspects finally also tagged ... or simply speaking all "paper based products" could be enriched with a Chipless Tag.

Locate Tag – What if a tag could be localized with centimeter accuracy?

If a tag could be localized with centimeter accuracy then e.g. the content of boxes could be correctly assigned to the box from remote distance ... or cameras for localization and identification of objects are not needed securing privacy ... or humans, machines or also robots simply know well where things are.

Far Tag – What if the reading range of a tag could reach 100 meter?

If a tag could be read in a range of 100 meter then e.g. fast moving vehicles could early be aware of crossing obstacles ... or cost-consuming localization and identification infrastructure could be saved ... or simply the penetration through objects will be significantly improved meaning larger read range also in severe so-called non-line-of-sight scenarios.

Thin Tag – What if a tag would be thin and flat?

If a tag would be as thin as a hair and additionally flat then e.g. it could be invisible below a coating or paint layer (even on metal) ... or it could be robust against movements due to no bonding between chip and antenna ... or it could be seamlessly embedded in simply all paper based products.

Printed Tag – What if a tag could be printed and/or bended?

If a tag could be printed and/or bended then e.g. it could be laminated on curved objects (also on metal) ... or it could be individualized for flexible materials ... or it could be seamlessly embedded in simply all paper based products.

If you have an answer to this question or would like to know more about ID4us, then please contact us!

Bernd Scharbert
Bernd Scharbert
Business Development
Duisburg, Germany
Cookies are necessary to provide you with our services. By continuing your visit on the website, you consent to the use of cookies.
More information Ok